⌘+K
arp-scan
Last updated
Unknown
Edit Source
arp-scan is an ARP oriented network scanner.
# Opts
- arp-scan -l (--localnet) - sends ARP queries to all valid IP addresses on your local networks
arp-scan -I wlan0 - specify wlan0 as the interface to use
1
2
3
4
5
6
7
8
9
10
11
| $ sudo arp-scan 10.10.210.6/24
Interface: eth0, datalink type: EN10MB (Ethernet)
WARNING: host part of 10.10.210.6/24 is non-zero
Starting arp-scan 1.9 with 256 hosts (http://www.nta-monitor.com/tools/arp-scan/)
10.10.210.75 02:83:75:3a:f2:89 (Unknown)
10.10.210.100 02:63:d0:1b:2d:cd (Unknown)
10.10.210.165 02:59:79:4f:17:b7 (Unknown)
4 packets received by filter, 0 packets dropped by kernel
Ending arp-scan 1.9: 256 hosts scanned in 2.726 seconds (93.91 hosts/sec). 3 responded
|
Similarly to Nmap, arp-scan will generate many ARP queries that we can see using tcpdump, Wireshark, or a similar tool.
# See also